Introduction
Overview
This manual contains procedures and information for proper installation and operation of
the Symmetricom 8040C/8040CLN Rubidium Frequency Standard.
Purpose of Equipment
The 8040C/8040CLN is a highly accurate and stable Rubidium frequency reference
standard that provides atomic clock performance in a user-configurable 1 U rack-mount
chassis. Each of the connectors can be individually programmed to generate any of the
following frequency outputs:
1, 5 or 10 MHz sine wave
1, 5 or 10 MHz square wave
1 PPS
The 8040C uses Symmetricom's model SA.22C Rubidium as its internal oscillator, and
provides direct user control via an RS-232 to perform the following tasks:
Adjust the SA.22C Rubidium oscillator frequency.
Syntonize (tune) the SA.22C to an external 1 PPS input.
Factory Configurations
Part Number
15230-101
15230-102
15230-104
15230-105
15230-106
15230-111
15254-201.docx
Description
Six Outputs, Standard Performance.
Twelve Outputs, Standard Performance.
Six Outputs, Low Phase Noise
Twelve Outputs, Low Phase Noise
Twelve Outputs (all 10MHz sine), Standard Performance
Twelve Outputs (all 10MHz sine), Low Phase Noise, DC power
4
Rev. C, 07/12/2011