Chamberlain T Installation Instructions

Carwash operator with logic 2.0 circuit

Hide thumbs Also See for T:

Download this manual

This addendum is to be used in conjunction with the owner's manual included with this

operator. Refer to the manual for all mounting and wiring instructions. The carwash mod-

ification includes a TEFC motor, Watertight/Oiltight Control Enclosure, watertight/oiltight 3-

button control station, and nickel-plated chain in lieu of all standard components of the oper-

ator.

Refer to page 2 & 3 of addendum for Electrical Box Replacement Parts.

Refer to page 4 of addendum for suggested control and power wiring connec-

tions for NEMA 4 applications

FOR ALL OTHER INSTALLATION INSTRUCTIONS REFER TO OWNERS MANUAL

Carwash Operator with Logic 2.0 Circuit

SHIPPED WITH OPERATOR.

ADDENDUM

Models: T, GT, GH, H and J

Model H

Page 1 ADDENDUM Carwash Operator with Logic 2.0 Circuit Models: T, GT, GH, H and J This addendum is to be used in conjunction with the owner’s manual included with this operator. Refer to the manual for all mounting and wiring instructions. The carwash mod-...
Page 2 LOGIC CONTROL (VER. 2.0) REPAIR PARTS KITS – ELECTRICAL BOX Below are replacement electrical box kits available for your operator. For replacement of electrical box components be sure to match model number of your unit to kit number below to ensure proper voltage requirements. For all other part operator part ordering information refer to owners manual supplied with operator.
Page 3 ILLUSTRATED PARTS – ELECTRICAL BOX...
Page 4 4. Ensure conduit jacket is not cut or ripped in any specifications for proper torque requirements). location along its surface. NOTE: For fitting attachments, always follow the NOTE: For conduit preparation, always follow the manufacturers instructions. conduit manufacturers instructions. c 2000, The Chamberlain Group, Inc. 01-17781A All rights Reserved...

Gh Gt H J