3-Point Seat Belt; 6-Point Seat Belt - Polaris RZR XP 1000 EPS 2019 Owner's Manual

SEAT BELTS
This POLARIS vehicle is equipped with seat belts for all riders. Always make
sure the seat belts are secured for the operator and all passengers before riding.
The driver's seat belt is equipped with a seat belt interlock. Vehicle speed will be
limited to 15 MPH (24 km/h) if the seat belt is not secured.

3-POINT SEAT BELT

To wear the 3-point seat belt properly, follow this procedure:
1. Pull the seat belt latch downward and across your chest toward the buckle at
the inner edge of the seat. The belt should fit snugly across your hips and
diagonally across your chest. Make sure the belt is not twisted.
2. Push the latch plate into the buckle until it clicks. Pull up on the strap to
tighten.
3. Press the red release latch on the buckle to release the seat belt.

6-POINT SEAT BELT

(TRAILS AND ROCKS EDITION)
This vehicle is equipped with a Click-6 safety harness with built-in interlock. To
wear the 6-point seat belt properly, follow this procedure:
1. Pull both the seat belt latch and buckle across your chest.
2. Push the latch plate into the buckle until it clicks.
3. Pull on the adjustment straps to tighten the straps on your hips and thighs.
4. To release the seat belt, press the red release latch on the buckle.
FEATURES AND CONTROLS
41