Table of Contents
Advertisement
Installation of Indoor Unit
1
Hook the indoor unit onto the upper portion
of the installation plate.( engage the three
hooks at the top of the indoor unit with the
upper edge of the installation plate) Ensure
that the hooks are properly seated on the
installation plate by moving it left and right
1
2
Installation pl ate
2
Unlock the tubing holder from the chassis
and mount between the chassis and instal-
lation plate in order to separate the bottom
side of the indoor unit from the wall.
* The feature can be changed according to a
type of model.
Left side piping
Drain hose
Terminal block
Connecting cable
Cable retainer
Right side piping
3
Tape the tubing pipe, drain hose and the
connection cable. Be sure that the drain
hose is located at the lowest side of the
bundle. Locating at the upper side can
cause overflow from the drain pan through
the inside of the unit.
ubing Holder
T
<Left side piping>
!
Insert the drain hose at left side when
you use left side piping type.
Terminal block
Connecting cable
Cable retainer
Tape
Connecting
cable
Drain hose
Connecting pipe
Drain hose
NOTE
13
Advertisement
Table of Contents
