Menu Structure; Setting Input Destinations - Tascam DR-70D Owner's Manual

Phantom power status
6
No icon: Phantom power off
: Phantom power on
Recording status
7
: Recording off
: Recording on
Project name
8
This shows the name of the project for the
recorded files.
9 Remaining recording time
The remaining recording time on the SD card is
shown in hours: minutes: seconds according to
the recording mode, sampling frequency and
recording format settings.
Low cut filter on/off status
0
: Low cut filter off
: Low cut filter on
Limiter function status
q
: Limiter off
: Limiter on
HOLD switch status
w
: HOLD switch off
: HOLD switch on
Peak value in decibels (dB)
e
Peak input level values are shown in decibels.

Menu structure

Various settings can be made using the
of the screen.
MENU
BASIC
RECORD Recording setting
OFF, ON
PAN
Set the left-right balance
(applied to stereo files during
2MIX recording and to
monitoring output)
LEFT 12 − CENTER − RIGHT
12
GAIN Set the input gain
LOW, HIGH, HI+PLUS
INPUT 1/2
Set for the channel 1 and 2
input connectors
EXT_STEREO, EXT_POWER,
XLR/TRS
INPUT 3/4 Set for the channel 3 and 4
input connectors
MIC, XLR/TRS

Setting input destinations

item Connect external mics to the EXT IN 1/2 or 1/L,
1.
BASIC
2/R, 3/L and 4/R jacks.
Press the MENU button to open the
2.
Screen.
Turn the DATA dial to select
3.
the DATA dial.
The
BASIC
Turn the DATA dial to select
4.
INPUT 3/4
Turn the DATA dial to select the input desti-
5.
nation.
Options
INPUT 1/2: EXT_STEREO (default), EXT_
POWER, XLR/TRS
INPUT 3/4: MIC (default), XLR/TRS
When finished, press the MENU button to
6.
return to the Home Screen.
MENU
, and press
BASIC
screen opens.
CH1 BASIC screen
or
INPUT 1 /2
, and press the DATA dial.
13
TASCAM DR-70D