CTC Union IFS+402GSM-4PHE24 Quick Installation Manual

Introduction
+
IFS 402GSM-4PH(E)24 are managed industrial grade Fast Ethernet PoE (Power
over Ethernet) switches that provide stable and reliable Ethernet transmission.
Housed in rugged DIN rail or wall mountable enclosures, these switches are
designed for harsh environments, such as industrial networking and intelligent
transportation systems (ITS) and are also suitable for many military and utility
market applications where environmental conditions exceed commercial product
specifications. Standard operating temperature range models (-10°C~60°C) and
wide operating temperature range models (-40°C~75°C) fulfill the special needs of
industrial automation applications.
Package List
 IFS
+
402SM-4PH(E)24 device with terminal block
 Console cable (RJ-45 to DB9)
 Quick installation guide
 Din rail with screws
Features
 Redundant dual DC inputs 24VDC/48VDC (20~57VDC), -48VDC
 Built-in very high efficiency booster (94~97%) that raises power to 53VDC for
PoE output
 Regulate PoE output voltage (53VDC) to stabilize PoE devices
 IP30 rugged metal housing
 Wide temperature range -40°C~75°C (IFS
 Support negative power input with isolated RS-232 console port
 Support many advanced Ethernet L2 functions
 Support IEEE1588 PTPv2 for precise time synchronization
 Console, Telnet, Web and SNMP management
 4KV surge protection for RJ-45, PoE and fiber ports
 2.25K VDC Hi-pot isolation protection for Ethernet ports and power
 Heavy Industrial grade EMS, EMI, Railway Traffic EN50121-4, N61000-6-2,
EN61000-6-4 & Safety EN60950-1
Specifications
Ethernet Interface
 Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX)
 4 RJ-45 (shielded) ports
 Speed: 10/100M (Auto)
Optical
 Standards: IEEE80802.3u (100Base-FX), 802.3z (1000Base-X)
 2 SFP-based slots
 Speed: 100/1000M (Manual)
Switch Features
 Store & Forward Switch
 Supports IEEE802.3x Flow Control
 Auto MDI/MDI-X
 Duplex: Full/Half (Auto-negotiation per IEEE802.3u)
 Switching Fabric: 4.8Gbps (Non-blocking)
 Memory Buffer: 512K Bytes
 MAC Table: 8K
 MTU: 64~9600 bytes
Power over Ethernet
 4 PoE enabled ports, End Span Alternate A Mode
 Supports IEEE802.3af 15.4watts PoE per port
 Supports IEEE802.3at 30watts PoE+ per port (120W budget)
 Positive (V+) pins 1, 2; Negative (V-) pins 3, 6; Data 1, 2, 3, 6
Specifications (cont.)
Power
 Absolute Input Range: 24/48VDC (20~57VDC), -48VDC
 Support Power Input Reverse Polarity Protection
 Support Dual Power Inputs
 Support Removable Terminal Block
 Consumption:
Items Total Power
Input Voltage Consumption
24VDC 132.5W
48VDC 133W
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 106 mm (D) x 62.5 mm (W) x 135 mm (H)
 Mounting: DIN-Rail, Wall Mount (Optional)
 Weight: 700 g
Environmental
 Operating Temperature: -10°C~60°C, -40°C~75°C (IFS
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC, FCC Part 15 Subpart B Class A, CE
EN55022 Class A
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
 Safety: EN60950-1
 4KV surge protection for UTP, PoE ports and SFP
 Hi Pot Protection: DC 2.25KV for power to chassis ground, Ethernet ports to
chassis ground
 Shock: EN60068-2-27
 Vibration: EN60068-2-6
Panels
4 6 5
7 3 2
1
Figure 1. Front Panel
www.ctcu.com
 Protective caps for SFP slots
 CD (SmartConfig, MIB file, Manual)
+
402GSM-4PHE24)
- 1 -
Device Power PoE Boost
Consumption Budget Efficiency
6.5W 120W 96%
7.7W 120W 96%
+
402GSM-4PHE24)
 Freefall: EN60068-2-32
 MTBF (MIL-HDBK-217): 626,632 Hours
8 7
Figure 2. Top Panel
- 2 -
Quick Installation Guide
+
IFS 402GSM-4PH24
+
IFS 402GSM-4PHE24
Industrial 4 x 10/100Base-TX + 2 x SFP with 4 PoE Managed Switch (Hardened)
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
© 2018 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
No. Description
UTP RJ-45 ports (support PoE
1
function)
2 SFP slots
Power, Fault, CPU ACT & Ring
3
Master LED indicators
4 Console port
PoE Ports
All 4 LAN ports support PoE (Power over Ethernet) per IEEE802.3af (15.4W) or
IEEE802.3at (30W) for connection to standard PoE PD (Power Devices) such as IP
Cameras, Access Points, IP Phones, Digital Signage, etc. PoE eliminates the need to
run separate power to these devices thereby simplifying deployment and reducing
expenses.
The LAN ports may also connect to any non-PoE device for normal Ethernet
transmission without any damage to the non-PoE device or to this device.
RJ-45 Ethernet Port Pinouts
Console Port
The RJ-45 port labeled "Console" is an RS-232 terminal port for local
management. These models use a "light" CLI (Command Line Interface) in addition
to a user friendly Web interface and industry standard SNMP. See page 6 for basic
CLI and Web operation.
One RJ-45 to DB-9 cable is provided with this device. Console port pinouts and
RS-232 DB-9 connector are illustrated below together with RJ-45 to DB-9 signal
mapping information. Use the supplied cable to connect the RJ-45 Console port to
a console PC.
Figure 3. Console Port Pinout
RJ-45 to DB-9 Signal Mapping
DB-9 (Female)
Direction
Signal Pin
RXD 2
TXD 3
GND 5
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
No. Description
5 UTP RJ-45 Link/ACT & PoE LED indicators
6 Link/ACT LED indicators for fiber optic
7 Terminal block
8 Earth grounding connection
RJ-45 Ethernet & PoE Pin Assignments
Pin RJ-45 Ethernet
PoE Output
No. 100Base-TX
1 RX+ V+
2 RX- V+
3 TX+ V-
4 -
5 -
6 TX- V-
7 -
8 -
Figure 4. RS-232 (Female) Pinout
RJ-45
Pin Signal
3 TXD
6 RXD
5 GND
- 3 - V1.0