Care, Cleaning, And Storage; Specifications; Antenna Parameters K-Band; Environment - Decatur Electronics GHD User Manual

GHD & SCOUT
TM
• Make sure the (dir) setting is set to t A (both toward and
away) during the tuning fork test. If it is not set to t A the
system may not detect the fork's frequency.
• Make sure the sensitivity (SEN) is set between 2 and 6 while
performing the tuning fork test. A setting of 1 will not allow a
proper tuning fork test to occur.
• A tuning fork does not generate a directional signal. Ignore
the directional indicator when performing the tuning fork test.

9. Care, Cleaning, and Storage

• Avoid spilling food, beverages and other liquids on the radar device.
• When you are not using or transporting the device, store it in its original
packaging.
• To clean the radar device, dust it with a soft clean cloth, which is free of
cleaning solutions.

10. Specifications

10.1 Antenna Parameters
K-Band
IACP
Nominal transmission frequency
Nominal horizontal beamwidth
Polarization
Nominal microwave power output
Maximum aperture power density

10.2 Environment

Ambient operating temperatures
Maximum humidity
TM
Type III
24.150 GHz
12°
Linear
(Vertical)
7 mW
<1 mW/cm
2
-22ºF to +158ºF
(-30ºC to +70ºC)
90% relative humidity
(non-condensing) at
98.6°F (37°C)
USER'S MANUAL
29