Table of Contents
Advertisement
GENERAL INFORMATION
New Components
New Stainless Steel Elements
7 - Segment Display
FID Console Display with Stainless Steel Bar Handle (Figure 4)
Stainless Steel Silverware Basket (Figure 5)
Full Stainless Steel Tub, Spray Arms, and Sump Cover (Figure 6)
Full Stainless Steel Tub
Stainless Steel Spray Arms
Stainless Steel Sump Cover
Maytag Chopper Dishwashers
1-5
n
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the MDB series and is the answer not in the manual?
Questions and answers
how to remove control block from mount. washer #mdb8959skbo
To remove the control block from the mount on Maytag washer model MDB8959SKBO (earlier models):
1. Unplug the dishwasher or disconnect power.
2. Remove the outer door panel (refer to page 4-4 in the manual).
3. Disconnect harnesses from the control board.
4. Depress the locking tab (see Figure 3 in the manual).
5. Slide the electronic control to the left to unhook the tabs on the back of the control from the slots in the door bracket (see Figure 4 in the manual).
This answer is automatically generated