Download Print this page

Advertisement

Quick Links

#360 Grain Cleaner
WARRANTY REGISTRATION AND POLICY
Buhler Manufacturing products are warranted for a period of twelve (12) months from
original date of purchase, by original purchaser, to be free from defects in material and
workmanship under correct, normal agricultural use and proper applications.
Buhler Manufacturing's obligations under this warranty shall be limited to the repair or
exchange, at Buhler Manufacturing's option, of any Buhler Manufacturing product or
part which proves to be defective as provided. Buhler Manufacturing reserves the right
to either inspect the product at the buyer's location or have it returned to the factory for
inspection.
The above warranty does not extend to goods damaged or subject to accident, abuse or
misuse after shipment from Buhler Manufacturing's factory, nor to goods altered or
repaired by anyone other than an authorized Buhler Manufacturing representative.
Buhler Manufacturing makes no Express Warranties other than those, which are
specifically described.
Any description of goods, including any references and
specifications in catalogues, circulars and other written material published, is for the
sole purpose of identifying goods and shall conform to such descriptions. Any sample
or model is for illustrative purposes only and does not create an Express Warranty that
the goods conform to sample or model shown.
The purchaser is solely responsible for determining suitability of goods sold.
This
warranty is expressly in lieu of all other warranties expressed or implied. Buhler
Manufacturing will in no event be liable for any incidental or consequential damages
whatsoever. Nor for any sum in excess of the price received for the goods for which
liability is claimed.
WARRANTY CLAIMS:
Warranty requests must be prepared on Buhler Manufacturing Warranty Claim Forms
with all requested information properly completed. Warranty Claims must be submitted
within a thirty (30) day period from date of failure repair.
WARRANTY LABOR:
Any labor subject to warranty must be authorized by Buhler Manufacturing. The labor
rate for replacing defective parts, where applicable, will be credited at a rate determined
by the Company, Buhler Manufacturing.
IMPORTANT FACTS:
Buckets and Bucket Tines Carry No Warranty
Bent Spears Carry No Warranty
Snowblower Fan Shafts Carry No Warranty
Mower Blades Carry No Warranty
Portable Auger Parts Have Two (2) Year Warranty
- 1 -

Advertisement

loading

Summary of Contents for Buhler 360

  • Page 1 #360 Grain Cleaner WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
  • Page 2: Safety Instructions

    #360 Grain Cleaner SAFETY INSTRUCTIONS Read and understand the operator’s manual before operating. Keep all safety shields and devices in place. Make certain everyone is clear before operating or moving the machine. Keep hands, feet and clothing away from moving parts.
  • Page 3 #360 Grain Cleaner MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS ALERT: The following instructions refer to the intake end of the cleaner as the front and the output end as the rear. Join the front frame (#1) and rear frame (#2) with two frame sides (#3) using four frame clamp plates (#6) with 5/16"...
  • Page 4 #360 Grain Cleaner MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS – cont’d. Assemble the three drum rings (#'s 67, 68, & 69); cone flow control (#76) and two drum screen support rings (#71) on the drum shaft (#70). The cone flow control comes between the front and center drum rings while the drum screen support rings are placed on each side of the center drum ring.
  • Page 5 #360 Grain Cleaner MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS – cont’d. CAUTION: All the strap bolts holding the drum screens should be turned so the end of the bolt trails the direction of rotation as shown in the drawing. This is done so the end of the bolt will not accidentally hook onto your hand or clothing while the drum is rotation.
  • Page 6 #360 Grain Cleaner MODEL #360 GRAIN CLEANER ASSEMBLY INSTRUCTIONS – cont’d. Both drum screens must also be notched to fit around the trash outlets as shown in the drawing below. A convenient way to hold the screen in position during assembly is by hooking several small springs across the lap joint.
  • Page 7 #360 Grain Cleaner OPERATION OF CLEANER The Cleaner will remove both fine seeds and chaff as well as larger trash such as corn cobs or stalks. A 6" utility auger is recommended as an intake auger. A 1 hp electric motor should be used to run both the cleaner and the utility auger.
  • Page 8 #360 Grain Cleaner #360 GRAIN CLEANER - 8 -...
  • Page 9 #360 Grain Cleaner #360 GRAIN CLEANER - 9 -...
  • Page 10: When Ordering Parts

    Always give your dealer the Model and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. #360 GRAIN CLEANER PARTS LIST Item # Part #...
  • Page 11 #360 Grain Cleaner 973626 Intake Auger Pivot 973627 Intake Auger Swivel 963024 Intake Auger Swivel Pin 9812430 1/8'' x 1'' Cotter Pin 973629 Intake Auger Connector Plate 81569 5/16'' Lock Washer 81568 5/16'' Hex Nut 84072 3/8'' X 3/4'' Hex Bolt...
  • Page 12 #360 Grain Cleaner 973650 5/8'' x 5/8'' Cone Screen 973647 2 x 2 Cone Screen 973648 3 x 3 Cone Screen 973649 4 x 4 Cone Screen 903519 5 x 5 Cone Screen 973641 Cone Flow Control 973642 Drum Screen Strap...
  • Page 13 #360 Grain Cleaner 6” UTILITY AUGER OPTION - 13 -...
  • Page 14 #360 Grain Cleaner 6'' UTILITY AUGER - OPTION (#360 GC) Item # Part # Description 963617 6'' x 10' Tube W/ 6'' Motor Mount 963618 6'' x 15' Tube W/ 6'' Motor Mount 63619 6'' x 20' Tube W/ 6'' Motor Mount...
  • Page 15 #360 Grain Cleaner #360 AND #480 GRAIN CLEANER SCREENS AVAILABLE CONE SCREENS OUTSIDE DRUM SCREENS CORN SCREENS 2 x 2 x 19 ga. – small 4 x 4 x 23 ga. - standard 5/8 x 5/8 x 17 ga. - standard WHEAT SCREENS 4 x 4 x 23 ga.
  • Page 16: Grain Cleaner Screens

    #360 Grain Cleaner GRAIN CLEANER SCREENS - illustrated in actual sizes - 16 -...
  • Page 17: Options Available

    #360 Grain Cleaner #360 GRAIN CLEANER - BUNDLE NUMBERS - Y360 QUANTITY BUNDLE DESCRIPTION REQUIRED NUMBER F4320 #360 Crate NOTE: Screens and motor (1 hp 1725 RPM) are not included with the grain cleaner. SCREENS AVAILABLE (One Cone & One Drum Screen Required per Cleaner) F4309 Cone Screen, 2 x 2 x 19 ga.