Sharp FO-4470 Facsimile Operation Manual page 17

Attaching the ADF exit tray
Insert the protrusion on the right side of the machine into the hole in the right
side of the ADF exit tray
protrusion on the left side of the machine goes into the hole on the left side of
the ADF exit tray
Attaching the received document tray
Slide the received document tray into the machine as shown. When it stops,
lift the end slightly and push in so that the tray locks into place.
Attaching the national character labels
If French will be used for the display language (see LANGUAGE SELECT on
page 115) attach the national character labels for French as shown below.
During procedures that require the entry of text, the keys below the labels can
be pressed to enter the corresponding characters.
➊
, then bend the tray slightly and insert so that the
➋
. Pull out the tray extension
2
➌
.
1
3
Important!
The received document tray must
be attached for the fax machine
to operate properly.
Connections
Flip up the
Rapid Key
overlay
15