Black Widow BW-1604D Instructions For Use

Steel motorcycle jack

Table of Contents

Download this manual

Steel Motorcycle Jack

Instructions for Part # BW-1604D

General Guidelines

• It is the user's responsibility to read and follow all instructions.

• Keep these instructions with the product at all times and review before each use.

• It is the responsibility of this product's owner to furnish the instructions to any person that borrows

or purchases the product.

• Inspect the product before use to ensure it is assembled properly and all parts are in safe working

order and free of defects.

• Never modify this product in any way.

• All circumstances cannot be addressed in these instructions. Please use common sense and

practice general safety measures when using this product.

• Parts and/or instructions are subject to change without notice.

• Do not exceed the 1100 lb rated capacity.

• This lift is designed to raise the front or rear of a motorcycle only. It is not designed to lift the entire

motorcycle. Do not use it for any other purpose it is not designed to perform.

• Keep children and unauthorized persons away from the work area.

• Wear ANSI approved safety goggles when operating the lift.

• Before using, lubricate the screw and the nuts with grease to reduce friction.

• Always keep your hands and feet away from the working area.

• Do not allow untrained persons to operate the lift.

• Do not expose the lift to rain or snow.

• Ensure you read, understand, and apply the safety instructions and warnings before use. Failure to

follow these instructions may result in property damage and/or personal injury.

Rev. 060518

DiscountRamps.com • 1-888-651-3431

Page 1

Table of Contents

Do you have a question about the BW-1604D and is the answer not in the manual?

Page 1 Steel Motorcycle Jack Instructions for Part # BW-1604D General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use. • It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product.
Page 2 Operation 1. Assemble the four casters onto the dolly pan. Place the mini lift into the dolly. 2. Rotate the screw with a socket wrench to adjust the height of the platform. 3. Adjust the platform to the appropriate height at the bottom of the motorcycle. Make sure the center of the load is aligned with the pivot, and keep the load stable and safe.
Page 3 Product Warranty and Liability GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.