Table of Contents
Advertisement
Liquiflo Installation, Operation & Maintenance Manual
Section 2:
Safety Precautions
2.1
General Precautions
•
Always lock out the power to the pump driver when performing maintenance on the pump.
•
Always lock out the suction and discharge valves when performing maintenance on the pump.
•
Never use heat to disassemble pump.
•
Before performing maintenance on the pump, check with appropriate personnel to determine if skin, eye or
lung protection is required and how best to flush the pump.
2.2
Precautions for Magnetic-Drive Pumps
Magnetic-drive pumps contain strong magnets, which pose health risks. Based on this, the following must be observed:
Caution!
• Individuals with cardiac pacemakers should avoid repairs on these units.
• Individuals with internal wound clips, metallic wiring, or other metallic
• Strong magnetic fields can cause tools and parts to slam
Strong magnets will attract iron, cast iron, carbon steel and some types of stainless steel. Keep magnets away
from credit cards, computers, computer discs and watches.
Caution!
Failure to observe safety precautions can result in personal injury,
equipment damage or malfunction.
prosthetic devices should avoid repairs on these units.
together,injuring hands and fingers.
H&3-Series MAG-DRIVE Gear Pumps
Models H1F-H9F, 31F-39F & 311F
9
Hide quick links:
Advertisement
Table of Contents
