Sharp AR-201 Operation Manual page 51

Problem
Power is on but copying
is not possible.
Lighting fixture flickers.
Is blinking in the copy quantity
display?
Is steadily lit in the copy quantity
display?
Is the indicator blinking?
Is the indicator blinking?
Is the same power outlet used for
the lighting fixture and the copier?
Be sure to use only genuine SHARP parts and supplies.
Please contact your SHARP service centre immediately if a problem persists
after checking the above.
Self-diagnostic function
An automatic self-diagnostic function is built into the copier. Should the
copier malfunction, the self-diagnostic function will locate the problem and
stop the copier to prevent damage. An alphanumeric code will appear in the
copy quantity display.
Example
Should the copier completely stop and a letter and a number appear alternately,
contact your SHARP service centre immediately.
COPIER TROUBLE?
Solution
The copier will not function. Contact your SHARP
service centre immediately.
Side cover(s) is open.
Close the front and side covers securely.
The toner cartridge must be replaced. See page
28, toner CARTRIDGE REPLACEMENT.
A misfeed has occurred. See page 30, MISFEED
REMOVAL.
Connect the copier to a power outlet which is
not used for other electric appliances.
49