Sharp AR-201 Operation Manual page 14

LOADING COPY PAPER
12
To set the selected paper size, press the PAPER SIZE
8
ENTER ( ) key.
The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators will go out.
For paper size setting, ensure that the COPY mode
has been selected. However, if copying, printing or
facsimile printing is being performed, paper size setting
cannot be made even in the COPY mode. See Note
on page 48.
Use the TRAY SELECT (
9
of which the paper size has been changed.
Each time the TRAY SELECT (
be indicated with a blinking paper feed location indicator.
Use the ORIGINAL SIZE ENTER (
10
the paper size which is set.
Each time the ORIGINAL SIZE ENTER (
a paper size will be indicated with a paper size indicator.
Press the START (
11
ENTER ( ) key.
To change the paper size setting of another tray, repeat steps 9 to 10
after pressing the START (
) key to select the paper tray
) key is pressed, a paper tray will
) key to select
) key is pressed,
) key and then the PAPER SIZE
) key.