Table of Contents
Advertisement
G
For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO key to select MANUAL and adjust with the light (
dark (
) keys as desired.
G
For photographs, select PHOTO and then adjust with the light (
and dark (
) keys as desired.
G
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for that
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
Set the number of copies using the numeric keys.
6
G
A single copy can be made with the initial setting, i.e., when "0" is
displayed.
G
Press the CLEAR (
Press the START key.
7
G
The number in the copy quantity display will decrease by 1 each time
a copy is made.
G
Press the CLEAR key to stop copying in the middle of a run.
G
To repeat the same copy sequence for a different original, simply
replace the original and press the START key.
G
If the paper in the selected tray runs out during the copy run and no
other tray contains the same size paper, the bypass tray can be selected
using the TRAY SELECT key.
NORMAL COPYING
) key to clear an entry if a mistake is made.
) and
)
17
Advertisement
Chapters
Table of Contents
