Table of Contents
Advertisement
REDUCTION/ENLARGEMENT/ZOOM
Manual
Place the original in the document feeder tray or on the
1
original table.
Use the PRESET RATIO selector (
2
zoom (
,
) keys to select the desired copy ratio.
G
To select a preset reduction or enlargement copy ratio, press the
or
key repeatedly until the indicator for the desired copy ratio is
lit.
A. Preset reduction ratios are: 95%, 77%, 64%, and 50% .
B. Preset enlargement ratios are: 121%, 129%, 141%, and 200%.
C. Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the
ratio, then press the
to increase the ratio.
G
When a zoom (
,
up and the zoom ratio will be displayed in the copy quantity display
for at least two seconds.
G
To verify a zoom setting without changing the zoom ratio, press and
hold down the copy ratio display (
the display will return to the copy quantity display.
G
To decrease or increase the zoom ratio rapidly, press and hold down
the
or
key. However the value will stop at the preset reduction
or enlargement ratios. To move beyond these ratios, release the key
and then press and hold it down again.
D. Same-size reset: Press the
copy ratio returns to 100%.
Ensure that copy paper of the desired size is installed in
3
the paper tray.
G
If an optional paper feed unit is installed:
Use the ORIGINAL SIZE ENTER key to select the original size. Copy
paper of the appropriate paper size will be automatically selected
based on the original size and copy ratio. If the selected PRESET
RATIO indicator or the ZOOM indicator blinks, the selected copy
image is too large for the copy paper size.
The desired paper tray can also be selected by pressing the TRAY
SELECT key.
Set the number of copies and press the START key.
4
,
) keys and the
or
key to set the approximate
key to decrease the ratio or the
) key is pressed, the ZOOM indicator will light
) key. When the key is released,
or
key repeatedly until the
key
19
Advertisement
Chapters
Table of Contents
