Sharp AR-164 Operation Manual page 14

LOADING COPY PAPER
12
To set the selected paper size, press the PAPER SIZE
8
ENTER key.
G
The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators except the START key indicator will
go out.
For paper size setting, ensure that the COPY mode
has been selected. However, if copying, printing or
facsimile printing is being performed, paper size setting
cannot be made even in the COPY mode. See Note
on page 58.
Use the TRAY SELECT key to select the paper tray of
9
which the paper size has been changed.
G
Each time the TRAY SELECT key is pressed, a paper tray will be
indicated with a blinking paper feed location indicator. If an optional
paper feed unit is not installed, this operation is not needed.
Use the ORIGINAL SIZE ENTER key to select the paper
10
size which is set.
G
Each time the ORIGINAL SIZE ENTER key is pressed, a paper size
will be indicated with a paper size indicator.
Press the START key and then the PAPER SIZE ENTER
11
key.
G
To change the paper size setting of another tray, repeat steps 9 to 10
after pressing the START key.