Tools Recommended - Harmar Mobility AL 055 Installation & Owner's Manual

TOOLS RECOMMENDED

THE FOLLOWING IS A SUGGESTION OF BASIC TOOLS RECOMMENDED TO HAVE ON HAND DURING INSTALLATION
AS WELL AS A GUIDE TO PORTRAY COMPLEXITY OF THIS TYPE OF INSTALLATION
THIS IS, BY NO MEANS, MEANT TO REPRESENT THE REQUIREMENTS AS A WHOLE, AS EACH INSTALLATION WILL
VARY TO SOME DEGREE. HARMAR LIFTS ARE DESIGNED TO INSTALL WITH AS LITTLE ASSEMBLY AS POSSIBLE.
SAE SOCKET
7/16"
1/2"
9/16"
3/4"
#2 FLAT HEAD
SCREWDRIVER
MARKING
IMPLEMENT
As always, if you have any questions, concerns or comments, please feel free to contact
Harmar's Technical Service Department at 866-378-6648 or "tech@harmar.com"
SAE ALLEN WRENCH
SAE WRENCH
7/16"
1/2"
9/16"
3/4"
#2 PHILLIPS HEAD
SCREWDRIVER
TAPE MEASURE
5/32"
1/8"
3/16"
5/16"
38"
SMALL HACKSAW
PILOT DRILL BIT
3/8" DRILL BIT
9/16" DRILL BIT
DRILL BITS
2
WIRE CUTTERS
NEEDLE NOSE
PLIERS
ELECTRIC DRILL
METAL FILE