Terminal Setup And Configuration; Terminal Pairing With Base (Bluetooth) - VeriFone VX690 User Manual

Communication type
The terminal supports PC-EFTPOS IP Gateway via the POS.
In the event that your main communication method is down, the terminal will automatically
failover to 3G/GPRS backup communications.
2.6

Terminal setup and configuration

To begin setting up your new Live eftpos integrated terminal:
1. Ensure the terminal base is connected to power.
2. Ensure the terminal base is connected to your Point of Sale (POS) via a supported
communications method.
3. Ensure the terminal is fully charged, or is sitting on the terminal base for power.
4. Ensure that your POS software is running on your Point of Sale. Please contact your
Point of Sale provider or refer to your POS Guide if further information is required.
5. Hold down the green "Enter" key found at bottom right corner of the terminal keypad,
until an audible beep is heard and/or the terminal screen powers on.
6. Follow the instructions for Bluetooth pairing below.
7. Your terminal should display "Ready" on-screen, at which point you can begin
transacting via your POS software.
2.7

Terminal pairing with base (Bluetooth)

Your terminal uses Bluetooth communications between the Keypad and the Base, with
security measures in place for all communications.
If the base does not display a solid blue light (indicating that it is currently paired with the
terminal), follow these instructions to pair the terminal with the base:
• Press the button on the front of the base and wait for the blue light to begin blinking.
• On the Keypad, select the correct base by identifying the 9-digit serial number printed
on the underside of the base.
• Wait for the pairing to complete, which will be indicated by a solid blue light displayed
on the base.
The terminal will display the following message if Bluetooth pairing has not occurred or is
unsuccessful:
Common issues in the initial pairing process include power and communications issues which
are often resolved by checking the connections between device and power outlets. Please
contact Live eftpos support for further assistance.
TERMINAL SCREEN
READY
NOT PAIRED
Live eftpos integrated User Guide
9