Imagine communications Selenio 6800 Installation And Operation Manual page 37

28
Appendix A
Communication and Control Troubleshooting Tips
Problem
The module does not seem to work.
Solutions
Ensure the correct frame is powered up.

Verify that all appropriate rear connections are secure.

Gently push the module into its slot in the frame to ensure it is seated properly. Then

verify the Status LED on the module is lit and green.
Ensure the back module does not have bent pins by following this procedure:

i. Unplug the front module.
ii. Unscrew and remove the back module.
iii. Carefully reposition any bent pins. If this is not possible, contact Customer Support.
Note: Depressed pins are will not affect the functionality of the product.