Advertisement
Quick Links
Product – ADC v11 and v12
Topic: Evertz 1200 Series 12x2 Routing
Switchers
This document describes the setup and use of the Evertz 1200 series routers in the ADC-100
environment. The modified GVG TEN-XL ASCII command protocol is used to control the Evertz
1200 series routers.
There are some hardware differences between the 1200 series routers and the Grass Valley
TEN-XL routers that have required differences in implementation of the protocol for the 1200
series routers. Since the GVG TEN-XL protocol is based on 10 input crosspoints and the Evertz
12 x 2 router family contains 12 input crosspoints, the protocol was extended to include
crosspoint #11 and #12.
Additionally, the 10XL protocol was originally designed to support an RS-485 bus containing a
number of 10x1 switchers. While it is not recommended to connect devices to ADC-100 in an
RS-485 configuration (there is no support for flow control on the Device Server), this driver
supports the concept of addresses for the purpose of directing commands to one of the two
destinations.
Release Date: 18-August-2003
Revision History
Revision
Protocol
0.1
0.2
1.0
1.1
Version Used
Model Tested:
Firmware:
Manual:
Protocol:
Grass Valley 10XL, using addresses as destinations, with extended Evertz proprietary
support for inputs 11 and 12
© 2015 Imagine Communications Corp.
Date
6-20-2003
8-12-2003
8-18-03
5-13-15
Evertz 1202S-AES 12x2 router
Version 1.1, build 125
Revision 1.3.2, Feb. 2003
Proprietary and Confidential
Author
D. Klochkov
C. Kocsis
B. Flemmons
Description
Initial Composition
Revision
Final
Rebranded
13-May-2015| Page 1 of 7
Advertisement
Related Manuals for Imagine communications Evertz 1200 Series
Summary of Contents for Imagine communications Evertz 1200 Series
- Page 1 Topic: Evertz 1200 Series 12x2 Routing Switchers This document describes the setup and use of the Evertz 1200 series routers in the ADC-100 environment. The modified GVG TEN-XL ASCII command protocol is used to control the Evertz 1200 series routers.
-
Page 2: Device Setup
4. Scroll down to Serial Address. Press Select to enter the Serial Address menu. Set this to the desired base address* for the low output of the router (the high output will be the © 2015 Imagine Communications Corp. Proprietary and Confidential... -
Page 3: Communications Parameters
Parity: Device Server Set-Up To configure the Evertz 1200 series router on the Device Server, you need access to the Device Server Configuration Utility: IMPORTANT Configuration Note: When you have finished making changes on a configuration screen, press Apply and all changes made upon the current configuration window will be applied to the driver. - Page 4 Sources: Select the Sources tab and fill in descriptions (up to 8 characters) and crosspoints for each of the source inputs. This is important if you plan on using the © 2015 Imagine Communications Corp. Proprietary and Confidential 13-May-2015| Page 4 of 7...
- Page 5 The actual log is configured on the Air Client application, but the information supplied to the logging mechanism from the router driver is regulated here. © 2015 Imagine Communications Corp. Proprietary and Confidential 13-May-2015| Page 5 of 7...
- Page 6 (twice) if there is no reply. If there is still no reply after three tries, the driver will stop trying and report an error (if Warnings is selected on the Reporting © 2015 Imagine Communications Corp. Proprietary and Confidential...
-
Page 7: Operation Notes
Test Procedures Error Conditions and Recovery Internal Document # xxxxx File xxxxx © 2015 Imagine Communications Corp. Proprietary and Confidential 13-May-2015| Page 7 of 7...