Bose PowerShare PS604D Installation Manuals page 13

pro.Bose.com
Technical Considerations:
When a loudspeaker EQ is selected in ControlSpace Designer, the appropriate crossover and V
limiters for that loudspeaker are automatically loaded.
Adjusting the Output Attenuation control of a single channel does not affect the level of other channels. The
only exception is if the amplifier is attempting to deliver more than the total amplifier wattage. If the total
amplifier power is exceeded, the amplifier will limit all outputs simultaneously and equally until the demand
is reduced. If the demand remains too high, the amplifier will gradually limit to an average of 200 watts
continuously.
There are multiple ways to adjust output power in a PowerShare amplifier application:
Adjust input signal level relative to the sensitivity setting of the amplifier.
Adjust the Matrix level in ControlSpace Designer.
Adjust the Out levels in ControlSpace Designer.
Adjust the Output Attenuation controls of the amplifier.
Adjust the CC-D ControlCenter digital zone controller(s) settings.
Adjust the limiter settings for each output using ControlSpace Designer software.
Adjust the transformer tap settings of any connected Hi-Z loudspeakers.
Installation Guide • PowerShare PS604D/PS404D
Installation
and V
Pk RMS
English • 13