Precautionary Measures; For Technical Support - Shark UV219CS Owner's Manual

PRECAUTIONARY MEASURES

Important:
If the suction opening in the unit, the hose or the extension tube become
blocked, switch off the vacuum cleaner and remove the blocking
substance before you start the unit again.
1. Do not operate the vacuum
cleaner to close too heaters,
or radiators.
2. Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.
3. Do not vacuum any liquids.
4. Keep hair, loose clothing, fingers,
feet and all parts of body away from
openings, rotating agitator and other
moving parts.
5. When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
6. Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
7. Do not run appliance over power
cord.
8. Do not use without dust cup
filter or filters in place.
9. Before you start vacuuming,
make sure to remove large or
sharp objects that might
damage the vacuum.
2
BAGLESS UPRIGHT VACUUM
TO ORDER REPLACEMENT FILTERS OR BELTS
for Model UV219CS
Call: 1 (800) 798-9398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
visit our website: www.sharkvac.com

FOR TECHNICAL SUPPORT

for Model UV219CS
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
Filter Ring, Secondary Filter, Pre-Motor and Exhaust Filters are washable.
They should however be replaced every three (3) months to ensure peak
performance of your vacuum.
The HEPA Dust Cup Filter may be washed. It should, however, be
replaced every three (3) to six (6) months, depending on amount of use, to
ensure peak performance of your vacuum. We recommend washing it
once a month or when suction appears to be reduced. To wash your HEPA
Dust Cup Filter, hold filter cartridge by frame flange and rinse under a tap
until all observable dirt has been removed. Some discoloration of the
HEPA filter material may occur, this is normal and will not affect the filter's
performance. When finished, shake off excess water. Do NOT wash in
dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to
dry COMPLETELY before using again. We recommend 24 hours to air
dry. DO NOT DRY IN DRYER.
Important:
Make sure that ALL the Filters are completely dry before inserting back in
the vacuum.
or
11