Store your vacuum cleaner a) Avoid contact with fabrics and 23. Your Shark® vacuum may not Cleaning and user maintenance shall with the power cord secured around finished surfaces. be designed to stand up on its own.
Page 3
ASSEMBLY ASSEMBLY Wand Handle & Hose Vacuum Pod Floor Nozzle (Click) (Click) (Click) (Turn to Click) (Click) 1. Place motorized Nozzle on floor and insert Wand, pressing it in until it clicks securely into place. 2. Place Pod onto wand and slide down to connect. 3.
Page 4
ODOR NEUTRALIZER TECHNOLOGY ODOR NEUTRALIZER TECHNOLOGY SETTINGS ODOR CARTRIDGE REPLACEMENT 1. REMOVE ODOR DIAL 2. REMOVE OLD ODOR FROM NOZZLE CARTRIDGE ODOR DIAL Flip up the handle and rotate the dial clockwise Rotate the cartridge counterclockwise in the dial Flip up the dial handle and rotate the odor dial until the two teal arrows are aligned.
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER SWITCH SURFACE SELECTOR UPRIGHT Thick Carpet & Area Rug Cleaning Press power button to turn on vacuum. To engage brushrolls, step on Please note the brushrolls will not spin Slide the surface switch to the top position to floor nozzle and tilt handle back.
EMPTYING THE DUST CUP CLEANING AND REPLACING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. CLEANING FILTERS Regularly rinse and replace the filters to maintain your vacuum’s suction power. To prevent damage from cleaning chemicals, rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
MAINTENANCE CHECKING FOR BLOCKAGES NOZZLE MAINTENANCE SELF-CLEANING BRUSHROLL If any hair is wrapped around the brushroll, continue vacuuming, using Carpet/Low Pile mode on a bare floor surface, a low-pile carpet, or a small area rug. This will allow the self-cleaning brushroll to remove the hair wrap and send it to the dust cup.
TROUBLESHOOTING AVAILABLE ACCESSORIES Power cord caught in brushroll or floor nozzle. Pet Crevice Tool • To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. This versatile, slender 8” tool removes pet If this occurs, immediately shut off power to the vacuum and remove the cord from the hair from hard-to-reach spaces like corners, brushroll or nozzle.
VIP warranty service options for select product categories. So we may better assist you, please register your 2. Manufacturer: Shark Ninja 89 A Street Needham, MA 02494 product online at registeryourshark.com and have the product on hand when you call.
Page 10
NOTES NOTES s h a r kc l e a n . c o m s h a r kc l e a n . c o m...
Need help?
Do you have a question about the Performance Powered Lift-Away UV2500 Series and is the answer not in the manual?
Questions and answers