Setting The Clock - Sony MHC-EC599 Operating Instructions Manual

B Speakers
Insert only the stripped portion of the
speaker cord.
To right
speaker
Note
Be sure to use only the supplied speakers.
C Voltage selector
For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the local power line voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
D Power
Plug the power cord into a wall socket.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from the
plug (only for models equipped with an
adaptor).
Attaching the speaker pads
Attach the supplied speaker pads to the
bottom of the speakers to stabilize the
speakers and to prevent them from
slipping.
GB
8
Red/3
To left
speaker
Black/#
Inserting batteries
Insert the two supplied R6 (size AA)
batteries, matching the polarities shown
below.
Notes
• Do not mix an old battery with a new one or
mix different types of batteries.
• If you do not use the remote control for a long
period of time, remove the batteries to avoid
damage from battery leakage and corrosion.

Setting the clock

You cannot set the clock in Power Saving
Mode.
1
Press "/1 to turn on the system.
2
Press CLOCK/TIMER SET.
If "PLAY SET" appears in the display
panel, press ./> repeatedly to
select "CLOCK", then press
ENTER.
3
Press ./> repeatedly to set
the hour, then press ENTER.
4
Press ./> repeatedly to set
the minutes, then press ENTER.