Table of Contents
Advertisement
Volume control
The volume level in the earpiece can be increased or decreased using the volume
control
/
.
v
V
Mute button
The microphone can be turned on/off during a call by pressing M.
Redial button
If the number dialled is engaged or if the last number dialled is to be redialled, lift the
receiver or press the headset button
On Hold
Press the
button to place a call on hold. The LED next to the button will illuminate.
h
The call can be resumed by pressing the
connected to the same line.
Recall
Press the
button followed by the extension number to transfer calls when connected
R
to a PBX. Access to additional network services can be gained by using the
and
keys. Contact your network operator for more information.
#
Select either TIME/EARTH recall using the switch located on the underside of the unit.
Memory
The telephone will store 3 one-touch (M1-M3) and 10 two-touch memories (up to 21 digits).
When a number is stored, you need only press one or two buttons to make a call.
Storing One-touch Memories
1. Lift the handset and press p (ignore anything you hear in the earpiece).
2. Press desired location M1-M3.
3. Enter the phone number. Press p and replace the handset.
Dialing using One-touch Memories
Lift the handset and press desired location M1-M3.
Storing Two-touch Memories
1. Lift the handset and press p (ignore anything you hear in the earpiece).
2. Press m.
3. Press desired location
4. Enter the phone number. Press p and replace the handset.
Dialing using Two-touch Memories
1. Lift the handset and press m.
2. Press desired location
If you need to insert a pause in the telephone number press P.
If you need to change a number, store the new number in the same location as the old one.
English
and press the
=
button again or from another telephone
h
-
.
0
9
-
.
0
9
button.
r
button,
R
*
Advertisement
Table of Contents
