Page 3
When battery pack is not in use, keep it away from other metal objects, like paper clips, Proxxon assumes no liability for the safe function of coins, keys, nails, screws or other small me- the device in the case of: tal objects, that can make a connection from one terminal to another.
Page 4
b) Do not use accessories which are not spe- h) Wear personal protective equipment. De- cifi cally designed and recommended by the pending on application, use face shield, safe- tool manufacturer. Just because the accessory ty goggles or safety glasses. As appropriate, can be attached to your power tool, it does not wear dust mask, hearing protectors, gloves assure safe operation.
Page 5
n) Never lay the power tool down until the Kickback is the result of power tool misuse and/ accessory has come to a complete stop. The or incorrect operating procedures or conditions spinning accessory may grab the surface and and can be avoided by taking proper precautions pull the power tool out of your control.
Page 6
Description of the machine started in the workpiece. The PROXXON IBS/A industrial drill/grinder is the ideal device for micro drilling, milling, grinding, g) Support panels or any oversized workpie-...
Please note that the sound and vibration measu- rements in particular have been performed with Powerful batteries in lithium-ion technology and Proxxon bits and cutters. When using third-party 2.6 Ah capacity guarantee continuous, high per- brands we cannot guarantee compliance with formance work.
Caution: 1 pc. Polishing disc for acrylic glass and Plexiglas Please note that your Proxxon power tool may 1 pc. Brass brush for machining brass, brass only be operated with the appropriate Proxxon alloys, copper, precious metals, battery and that the charger is to be used exclu- semi-precious stones, plastic and wood.
Page 9
3. diameters require higher speeds than those with a larger diameter. The IBS/A industrial drill/grinder was ergonomic- • Caution: You absolutely must observe the ally designed to make it easy to handle and guide permissible maximum speed of the bits and precisely.
Service note Working with the device Please note: The mains power input for the char- ger may only be replaced by our Proxxon Service 1. To activate, operate the rotary button 1 (Fig. 1) Department or a qualifi ed specialist! and set the right speed for the work.
8 CE Declaration of conformity Name and address of the manufacturer: PROXXON S.A. 6-10, Härebierg L-6868 Wecker Product designation: IBS/A Article No.: 29800/29802 On our sole responsibility, we declare that this product conforms to the following directi- ves and normative documents: EU EMC Directive 2016/30/EU DIN EN 55014-1 / 05.2012...
Page 14
Service note All PROXXON products are thoroughly inspected after production. Should a defect occur nevertheless, please contact the dealer from whom you purchased the pro- duct. Only the dealer is responsible for handling all legal warranty claims which refer exclusively to material and manufacturer error.