Mitsubishi Electric Series PDFY Technical & Service Manual page 20

8-2 THERMISTOR (Liquid piping temperature detection)
OPERATING PROCEDURE
1.Removing the cover
(1)Remove the fixing screws(two) of the cover(C) and
remove the cover.
2.Removing the thermistor
(1)Remove the thermistor(D), from the thermistor
holder(E), which are installed on the copper tube.
8-3 THERMISTOR (Intake air temperature detection)
OPERATING PROCEDURE
1.Removing the thermistor and thermistor holder
(1)Pull out the thermistor holder(F) and thermistor
(G) which are fixed the control box.
19
Be careful removing heavy parts.
PHOTOS
(C)
(D),(E)
PHOTOS
(F),(G)
Fig.1
Fig.2
Fig.1