2
Bluetooth Installation
CD
Installing Your
External Bluetooth
USB Device and
Virtual COM Ports
EXHIBIT 8: USER MANUAL
I
NSTALLING
D
EVICE AND
The Bluetooth Installation CD contains the following:
Microsoft Windows 98 Second Edition (SE), 2000, and Millennium Edition (Me)
setup programs and drivers
Bluetooth Connection Manager by 3Com
XTNDConnect PC mobile synchronization and management software
3Com Mobile Connection Manager
README.TXT file with updated information about your Bluetooth USB device
This Bluetooth Wireless USB Device User Guide
Adobe Acrobat Reader
NOTE: If you are accessing this manual as part of the installation of your
Bluetooth USB device, skip to step 3 below.
1 With the computer on and Windows 98 SE, 2000, or Me running,insert the
Bluetooth Installation CD into the CD-ROM drive. The auto-start feature starts the
installation. If auto-start is disabled on your computer, click Start>Run and type
D:\SETUP.EXE (where D: is your CD-ROM drive).
2 Select Install Bluetooth Hardware.
3 Attach the USB device to the USB port (see the first illustration below). You are
prompted to "Add new Hardware."
After attaching the USB device, if auto-start is enabled and nothing happens
within five seconds, restart your computer and log in to Windows. The installation
process will begin when the computer restarts.
4 Respond to the prompts to add the new hardware.
During the installation process, you may receive prompts for your Windows
operating system installation CD. Insert the CD and indicate the correct path. The
path for Windows 2000 is D:\DRIVERS.W2K. The path for Windows 98 SE is
D:\DRIVERS.W98, and the path for Windows Me is D:\DRIVERS.WMe, where D: is
your CD-ROM drive.
5 Your computer will go through a brief installation process during which it will
display several windows indicating what is currently installing. THIS WILL TAKE
SEVERAL MOMENTS.
PAGE 6 of 15
Y
B
OUR
LUETOOTH
C
ONNECTION
USB
M
ANAGER
Need help?
Do you have a question about the SL-1020 and is the answer not in the manual?