Install Battery; Connect Power Adapter - Oregon Scientific RESONANCE CIR600 User Manual

POWER YOUR CLOCK

INSTALL BATTERY

The device comes with a back-up battery installed. Remove the plastic tab
th and
before using the clock. Replace the battery when
1. Screw off the battery compartment cover.
2. Insert a new CR2025 3 V battery, positive (+) side up, and replace the
3. Press RESET.
NOTE
• Keep button-cell battery away from children. Swallowing a button-cell

CONNECT POWER ADAPTER

Connect the supplied AC/DC power adapter to the DC 12 V, 2.0 A jack on
the rear of the unit and plug into a standard outlet.
NOTE
• The battery is only for back-up use. Always connect the unit to the
• When the clock is connected to AC power source, it can charge your
• Make sure the adapter is not obstructed and is easily accessible to
• To completely disconnect from power, unplug adapter from the mains.
SET THE CLOCK TIME
1. Press and hold
2. Press
3. Press
• The setting order is 12/24 hour format > Hour > Minute > Year >
CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 3
battery compartment cover.
battery can be fatal.
power grid source via power adapter.
smart device via the USB port.
the unit.
for 3 seconds to enter the clock time setting mode.
or repeatedly to adjust settings; press and hold
to quickly setting.
to confirm and go to the next setting.
Calendar format (MD/DM) > Month > Day > Weekday language.
displays.
or
2017/10/25 下午2:23