Masterbuilt BUTTERBALL MB23015018 Operation Manual And Safety Instructions page 11

Operating Instructions
1. Mount the control panel and element onto the bracket on the
outer shell. See step 2 on page 7.
NOTE: The control panel is correctly attached when the heating
element is positioned inside of the inner pot and fully submerged
in oil or water during use.
2. Add water to the MIN 1 gallon (4 qts.) or MAX 1.3 gallons (5.2 qts.)
fill line. If cooking with oil, always fill pot to the middle of MAX fill
line.
3. Attach the breakaway power cord to the control panel. See step
4 on page 8. Plug the breakaway power cord into an outlet (refer
to the "WARNINGS AND IMPORTANT SAFEGUARDS" section of
the manual). The red power light will turn on indicating that the
appliance is plugged in and the element and control panel are
mounted correctly to the mounting bracket.
4. Turn the dial to set the temperature. The green ready light will
turn on when the appliance has reached the set temperature and
is ready for use.
5. When cooking time has elapsed and food is done turn dial to the
off position, then unplug the power cord from the outlet. Carefully
lift the basket with the retractable side handles (see Figure A
below). Allow excess oil or water to drain by hooking the drain
clip on the basket into the drain clip mounting hole (see Figure B
below).
• When using the drain clips on the basket, make sure that the basket is firmly in place in the drain clip
mounting hole before releasing the handle. Failure to follow warning may allow the basket to fall back
into hot oil or water which may cause damage to surroundings or personal injury.
Figure A Figure B
WARNING
POWER
LIGHT
READY
LIGHT
TEMPERATURE
DIAL
DRAIN
CLIP
DRAIN CLIP
MOUNTING HOLE
11