Streetwave™ Configuration; Configure Lan And Dsrc Ip Addresses On Streetwave - Savari STREETWAVE User Manual

Table of Contents

Advertisement

ASD-SCMS Communication Establishment
The following paragraph explains the connection between ASD to StreetWAVE™ and
StreetWAVE™ to SCMS server
a. StreetWAVE™ Broadcasts WSA with
a. SCMS IPV6 Address
b. SCMS Port
c. Default Gateway which is DSRC IP of StreetWAVE™
d. Prefix and Prefix Length which is in the same network as DSRC Interface Prefix
e. Configured DNS IPV6 address
b. ASD receives these WSA. Generates IPV6 Address as per the prefix/prefix length
announced.
c. Configures Default Gateway as per WSA. This is typically StreetWAVE™ DSRC IP
address
d. Configures DNS received over WSA
e. ASD Tries to establish a communication with the Service IP and Service Port via
StreetWAVE™. Service IP and Service Port are announced in the WSA and they are
SCMS Server IP and Port
f.
StreetWAVE™ will act as router for the traffic coming from ASD on DSRC Interface and
Route all the traffic to the Ethernet Interface
6.7.2
StreetWAVE™ Configuration
For example
SCMS IP is 'fdca:39c0:a830::12' and SCMS Port is 8894
StreetWAVE™ Ethernet IP is 'fdca:39c0:a830::e6'
6.7.3

Configure LAN and DSRC IP addresses on StreetWAVE™

CLI command : config system network eth0 <parameter> < value>
Configure the parameters in the table for the above-mentioned file
Parameter
config interface lan
option ifname
option proto
option ipaddr
option netmask
option ip6addr1
option ip6addr1
option ip6gw
option ip6addr2
Savari Inc., Confidential
Copyright © Savari, Inc, 2017
Value
'eth0'
'static
'192.168.48.230'
'255.255.248.0
'2001:100::1/64'
'fdca:39c0:a830::e6/48'
'fdca:39c0:a830::6'
'2001:200::1/64'
RSU2 User Guide

Advertisement

Table of Contents
loading

Table of Contents