Specifications - Sennheiser Rack-mount Receiver EM 300 G3 Instruction Manual

Specifications

Specifications
RF characteristics
Modulation
Frequency ranges
Receiving frequencies
Switching bandwidth
Nominal/peak deviation
Receiver principle
Sensitivity (with HDX, peak deviation)
Adjacent channel rejection
Intermodulation attenuation
Blocking
Squelch
Pilot tone squelch
Antenna inputs
AF characteristics
Compander system
EQ presets
Preset 1: "Flat"
Preset 2: "Low Cut"
Preset 3: "Low Cut/High
Preset 4: "High Boost"
54
boost"
wideband FM
516–558, 566–608, 626–668, 734–776,
780–822, 823–865 MHz (A–E, G, see page 5)
1,680 receiving frequencies,
tuneable in steps of 25 kHz
20 frequency banks, each with up to 24 factory-
preset channels, intermodulation-free
6 frequency banks, each with up to 24 user
programmable channels
42 MHz
±24 kHz/±48 kHz
true diversity
< 2 μV for 52 dBA
rms S/N
typ. ≥ 75 dB
typ. ≥ 70 dB
≥ 75 dB
Off, 5 to 25 dBμV, adjustable in steps of 2 dB
can be switched off
2 BNC sockets
Sennheiser HDX
–3 dB at 180 Hz
–3 dB at 180 Hz
+6 dB at 10 kHz
+6 dB at 10 kHz