Connecting The Mains Cable; Switching The Ac 3200 On And Off - Sennheiser Active Transmitter Combiner 8:1 AC 3200 Instruction Manual

Connecting the mains cable

70 W

Switching the AC 3200 on and off

»
RF indicators
The AC 3200 has eight control LED
channels where transmission power is available.
70 W
Connect the suitable mains cable to the IEC mains socket
and to the mains.
Note:
The AC 3200 can be connected to any mains power supply
with 100 V to 240 V AC (50 to 60 Hz).
Press the on/off switch
The AC 3200 switches on and the LED
Press the on/off switch
The AC 3200 switches off and the LED
Note:
After switch-off, the AC 3200 is in standby mode. To
disconnect the device from the mains, pull out the mains
connector from the wall socket.
Putting the AC 3200 into operation
.
lights up red.
again.
goes off.
which light up on the
11