Table of Contents
Advertisement
Putting the AC 3200 into operation
10
To mount the AC 3200 into a 19" rack:
Slide the AC 3200 into the 19" rack.
Secure the rack mount "ears"
screws (not included).
Connecting the antenna
CAUTION!
Danger of damage to the devices!
Do
not
connect other active combiners to the AC 3200.
Never connect the AC 3200 to other active
combiners.
Only connect suitable antennas to the output
of the AC 3200!
The AC 3200 active transmitter combiner can be used with
either the A 2003 UHF directional antenna, the A 1031 U omni-
directional antenna or the A 5000 CP circularly polarized UHF
antenna. The antenna transmits the signals of all connected
transmitters (see page 12).
The signals are combined onto the antenna output with no
distribution attenuation.
To connect an antenna:
Connect the antenna using a low-attenuation 50 Ω coaxial
cable.
Connect the coaxial cable to the antenna output
Connecting a transmitter to the AC 3200
To connect a transmitter:
Connect the BNC cable of the transmitter to one of the eight
RF inputs
RF IN 1
to the rack using four
daisy-chain several AC 3200. Do
to
RF IN 8
.
not
.
Advertisement
Table of Contents
