How To Restart Gopure Car Air Purifier After A Filter Replacement; To Reset Your Device After Replacing The Filter - Philips GP7101 User Manual

3 Remove the old
filter as shown.
4 Using the
groove,insert a new
original GoPure filter.
m Important
The filter slides in only
one way, do not force
it in. See above.
5.2 How to restart GoPure car air purifier
after a filter replacement
m Important
You must reset
the Philips GoPure
device after every
filter replacement.
To reset your device
after replacing
the filter:
1 Plug the device
into the power supply
and ensure that it is
turned off.
2 Touch and hold the
power button over 3s
until "ding ding" sound,
the filter replacement
indicator is blinking in
red for 15s, filter reset
done once indicator
turns off.
3 Car air purifier
purifier operates in the
normal mode once top
cover is locked.
4 Repeat the above
steps if the filter
reset fails.
n Important
For you safety,GoPure
car air purifier will shut
down automatically
whenever you open the
top cover.
9