Buffalo WLI-PCM-L11GP User Manual page 38

12
Exit Windows98/95 and turn the computer off.
13
Remove the WLI-PCM-L11GP.
Check the PC card driver referring to "Checking PC card driver" on
page 13 . Then re-install the driver following the steps in "Installa-
tion Instructions".
Go to "Checking PC card driver" on page 13 .
Computers are not listed
Computers are not listed after double-clicking the Network Neighbor-
hood icon.
Possible cause 1
The password was not entered when Windows98/95 started.
(The Cancel button is clicked or the ESC key is pressed when Win-
dows 98/95 starts.)
Solution 1
Be sure to enter your user name and password when starting
Windows98/95. If you forget your password, enter a different user
name. In this case, you do not have to enter the password. If you enter
a new password, the new user name and password are registered in
the computer.
Possible cause 2
Network settings are not correct.
Solution 2
Check the protocol, workgroup name, and sharing settings.
When using Windows98/95, refer to "Preparing for connection to net-
work" on page 21 .
36 WLI-PCM-L11 User's Manual