Buffalo WLI-PCM-L11GP User Manual page 19

Installation to a notebook computer
Follow the steps below when installing the WLI-PCM-L11GP to a note-
book computer.
When using Windows98/95, the WLI-PCM-L11GP can be installed and removed
with the computer turned on because it supports the Hot Swap feature.
When using WindowsNT4.0, be sure to turn off your computer before installing
the WLI-PCM-L11GP.
Insert the WLI-PCM-L11 completely into the
PC Card slot on your somputer.
When using WindowsMe/98/95, refer to the "Installation Instructions" separately,
then refer to "WindowsMe/98/95 Settings" on page 19
When using WindowsXP/2000/NT4.0, refer to the "Installation Instructions" sepa-
rately , and online manual Driver CD.
WLI-PCM-L11 User's Manual 17