Installation; Drive Configuration - Buffalo WLI-PCM-L11GP User Manual

2

Installation

This chapter describes the procedure to install the WLI-PCM-
L11GP into your computer. If you are using WindowsMe/98/95, you
need to check your driver
Check the drive configuration of your computer before installing the
driver. Screens from Windows98 are used in this example.
1
Double-click the My Computer icon.
2
Select View R Details.
Drive names on your computer
Drive
3.5" Floppy Disk
Harddisk (Local Disk)
CD-ROM
When using WindowsXP/Me/98/95/2000, go to "Before installing the WLI-PCM-
L11GP" on page 13 .
When using WindowsNT4.0 go to "Installing the WLI-PCM-L11GP" on page 16 .
12 WLI-PCM-L11GP User's Manual

Drive configuration

In the graphic above
A:
C:
D:
Check the drive names
listed in the window.
Take note of the drive
names on your com-
puter in the provided
table below. These will
be required in the fol-
lowing steps.
On your computer