Initial Settings; Correcting Distorted Sound; Resetting The Audio Functions - Pioneer DEQ-P7650 Operation Manual

Initial Settings

Correcting distorted sound

You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HI to ensure quality sound.
1 Press FUNCTION to select D_ATT.
Press FUNCTION repeatedly until D_ATT ap-
pears in the display.
2 Press c or d to select LOW or HI.
Pressing c or d will switch between HI (high)
and LOW (low) and that status will be dis-
played.
# To cancel initial settings, press BAND/ESC.
# You can also cancel initial settings by holding
down FUNCTION until the unit turns off.
Resetting the audio
functions
This function cannot be operated when DVH-
P7050, DVH-P5050MP or AVH-P6550DVD is con-
nected to this unit.
You can reset all audio functions except vo-
lume.
1 Press FUNCTION to select A-RESET.
Press FUNCTION repeatedly until A-RESET ap-
pears in the display.
2 Press a to display RESET OK?.
RESET OK? appears in the display.
# To cancel resetting the audio functions, press
BAND/ESC.
3 Press d to display REALLY?.
REALLY? appears in the display.
4 Press a to reset audio functions.
COMPLETE appears in the display.
All manuals and user guides at all-guides.com
Section
04
19
En