Using The Dynamic Range Control; Using The Direct Control; Using The Down-Mix Function; Using The Dolby Pro Logic B - Pioneer DEQ-P7650 Operation Manual

Digital Signal Processor
! Video CD, CD and MP3/WMA are set to the
same source level adjustment volume auto-
matically.
! DVD and the optional DVD player are set to
the same source level adjustment volume
automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Using the dynamic range
control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
1 Press AUDIO to select DRC.
Press AUDIO until DRC appears in the dis-
play.
# When playing other than the DVD disc, you
cannot switch this mode.
2 Press a to turn the dynamic range con-
trol on.
DRC :ON appears in the display. Dynamic
range control is now on.
# To turn dynamic range control off, press b.

Using the direct control

You can override audio settings to check for ef-
fectiveness of your audio settings.
! All audio functions are locked out during
DIRECT:ON except VOLUME.
! If the source is a 2-channel LPCM audio or
a 2-channel Dolby Digital audio and you
All manuals and user guides at all-guides.com
select DIRECT:ON, audio is heared only
over front left/right speakers.
1 Press AUDIO to select DIRECT.
Press AUDIO until DIRECT appears in the dis-
play.
2 Press a to turn the direct control on.
DIRECT:ON appears in the display. Direct con-
trol is now on.
# To turn direct control off, press b.

Using the down-mix function

This function cannot be operated when DVH-
P7050, DVH-P5050MP or AVH-P6550DVD is con-
nected to this unit.
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 Press AUDIO to select Lo/Ro.
Press AUDIO until Lo/Ro appears in the dis-
play.
# If the down mix Lt/Rt has been previously se-
lected, Lt/Rt will be displayed.
2 Press c or d to switch the down mix
settings.
! Lt/Rt  Down mix so that the surround
components can be restored (decoded).
! Lo/Ro  Stereo mix the original audio that
do not contain channel modes such as sur-
round components.

Using the Dolby Pro Logic B

This function cannot be operated when DVH-
P7050, DVH-P5050MP or AVH-P6550DVD is con-
nected to this unit.
Section
03
9
En