Applying Effects; Comparing With Or Reverting To The Unedited Drum Kit (Snapshot) - Roland V-Drums TD-50 Quick Start Manual

Applying Effects

For each pad, you can adjust the way in which its volume changes
(pad compressor) and adjust its tone (pad equalizer), or apply up to
three effects to the entire drum kit (multi-effect).
Reference
5 For details on the parameters that can be edited, refer to
"Data List" (PDF).
5 You can apply a compressor or equalizer to the entire drum kit
(master compressor, master equalizer). For details, refer to "Reference
Manual" (PDF).
1
Press the [MIXER] button.
2
Use the PAGE [UP] [DOWN] buttons to access the edit
screen.
PAD EQ screen
PAD COMPRESSOR screen
MULTI EFFECT screen
3
Edit the effect settings.
Turning effects on/off
1
Press the [MIXER] button.
2
Use the PAGE [UP] [DOWN] buttons to access the edit
screen.
3
Press a function button to turn the setting on/off.
Screen Button
PAD EQ screen [F4] button
PAD COMPRESSOR
[F4] button
screen
MULTI EFFECT screen [F5] button
Explanation
Turns pad equalizer on/off.
Turns pad compressor on/off.
Turns on/off the multi-effect 1–3
selected by the [R1] knob.
Comparing with or Reverting to the
Unedited Drum Kit (SNAPSHOT)
You can temporarily save the currently-edited drum kit, and
compare it with the current settings or revert back to it (snapshot).
Save temporarily
Current drum kit
(CURRENT)
1
Select the drum kit that you want to edit.
When you select a drum kit, the data of the selected drum kit is
stored in "UNDO. "
2
When you want to temporarily save the settings of the
currently-edited drum kit, press the [SNAPSHOT] button.
The SNAPSHOT screen appears, and the current drum kit (CURRENT)
is selected.
3
Press the [F5] (SAVE) button.
The current drum kit settings are saved in STOCK.
4
Press the [EXIT] button to exit the SNAPSHOT screen, and
edit the drum kit.
* When you switch drum kits, the settings saved in STOCK are
deleted.
5
Press the [SNAPSHOT] button.
6
Use the [F1]–[F3] buttons to switch between the saved
drum kits, and play them to compare.
Button Explanation
[F1] (CURRENT) button Current drum kit settings
[F2] (STOCK) button Drum kit settings saved in STOCK
Settings immediately after selecting the
[F3] (UNDO) button
drum kit
7
If you want to return the current drum kit settings to the
state immediately after selecting a drum kit or STOCK,
press the [F2] or [F3] button to select the drum kit settings
to which you want to return.
If you want to continue with the current drum kit settings, press the
[KIT] button to return to the DRUM KIT screen.
8
Press the [F4] (RESTORE) button.
A confirmation message appears.
If you decide to cancel, select "CANCEL" and press the [ENTER]
button.
9
Select "OK" and press the [ENTER] button.
The current drum kit settings return to the settings of the drum kit
that you selected in step 7.
10
Press the [KIT] button to return to the DRUM KIT screen.
Customizing a Kit
(STOCK)
Immediately
after selecting
drum kit (UNDO)
Edit
19