Related Manuals for Polyaire ZoneMaster ZoneSwitch V2
Summary of Contents for Polyaire ZoneMaster ZoneSwitch V2
- Page 1 ZoneSwitch V2 Damper Control System Operation & Installation Instructions www.polyaire.com.au ©2015 Polyaire Pty Ltd...
-
Page 3: Table Of Contents
Please read the instructions carefully before installing the Zonemaster Zone Switch V2 control system. Polyaire Pty Ltd does not accept any responsibility for loss or damage that may occur as a result of the incorrect installation of the Zone Switch V2 control system. -
Page 4: Operation Instructions
Pressing any zone button will activate the touchpad. The zone being pressed will turn on and all other zones will remain unchanged. In the seasons when the air conditioning system is not in use, owners may turn off all zones. But if the spill function is enabled, there will be always one zone open and its LED on the touchpad will flash to indicate the active spill function. This may be annoying if AC is not in use. Turning off the touchpad completely will have all LEDs on the touchpad off. All zones will maintain their status. ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... - Page 5 ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions...
-
Page 6: Installation Instructions
DAMPER MOTOR CABLE WITH CENTRE (BRIGHT GREEN) LATCHED PLUG UP TO 6 DAMPER MOTORS OPTIONAL 24 VAC TRANSFORMER ZONESWITCH V2 MAIN CONTROL MODULE CABLE WITH LEFT LATCHED PLUG TOUCHPAD 2 CABLE WITH LEFT LATCHED PLUG TOUCHPAD 1 ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 7: Wiring Schematic
AC unit is running. See section 9) for details of setting spill function. ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 8: Touchpad Preparation
31 preset names which can be used or personal names can be written on the 2 blank stickers provided. After applying the zone name label on the touchpad, peel off the transparent protective covering film from the top of the label. ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 9: D) Applying 4-Zone Or 6-Zone Label
T1 and T2 on the mainboard respectively. The two touchpad ports are equal and the touchpads can be connected to any of them. ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 10: Setting Spill Function
NOTE: If the spill function is set, please make sure to choose an installed zone as spill zone, which has a motorised damper connected to. ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 11: Troubleshooting Guide
• Damper blade might be installed in the wrong position. If the wrong way yes, reposition the damper blade by removing the damper motor and then re-align the damper blade to the respective position. • Check if the cable connecting the damper motor and the main control module is faulty. If yes, then replace the cable. ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 12: Appendix A - Specifications
Avoid static electricity hazards Avoid electromagnetic radiation sources Avoid dust contamination Avoid highly corrosive environments Maximum Single Cable Length Control Cable (Centre Latched): 20 metres Data Cable (Left Latched): 10 metres ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 13: Appendix B - Zonemaster Cable Tester
2) Features of the Cable Tester • Tests Centre Latched and Left Latched RJ12 cables. • Portable, quick and easy to test cables. • Bright LED’s to indicate a faulty cable in the dark roof spaces. • 9V battery operated. • User Instructions provided. ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions... - Page 14 ZONEMASTER ZONESWITCH V2 DAMPER CONTROL SYSTEM - Operation & Installation Instructions...
- Page 16 POLYAIRE PTY LTD 11-13 WHITE ROAD GEPPS CROSS SOUTH AUSTRALIA, 5094 TEL: (08) 8349 8466 FAX: (08) 8349 8446 www.polyaire.com.au ZMZS2_OPINS_V2...
Need help?
Do you have a question about the ZoneMaster ZoneSwitch V2 and is the answer not in the manual?
Questions and answers