Subscribe to Our Youtube Channel
Related Manuals for Polyaire Zonemaster Zone Switch
Summary of Contents for Polyaire Zonemaster Zone Switch
- Page 1 ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM Operation & Installation Instructions www.zonemaster.com.au www.polyaire.com.au ©2012 Polyaire Pty Ltd...
-
Page 3: Table Of Contents
Please read the instructions before installing this Zonemaster Zoning Control System. Polyaire Pty Ltd does not accept any responsibility for loss or damage that may occur as a result of the incorrect installation of this Zonemaster Zone Switch Control System. -
Page 4: Operation Instructions
The LED will turn OFF indicating the zone is OFF (Zone Closed). Note: If power fails, zones will automatically resume their original position prior to failure once power is returned. ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 5: Installation Instructions
NOTE: The zones on the touchpad are marked as Z1 and Z2 from Connected to the top of the touchpad Port 1 Touchpad Connected to Port 2 ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 6: Zoning Areas
(Figure 2). After applying the zone name label on the touchpad, peel off the transparent protective covering film from the top of the label. FIGURE 2 - ZONE NAME STICKER SHEET ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 7: C) Applying 2-Zone Label
Mount the back cover to the wall on the previously marked location. c) Attach the front cover to FIGURE 4 the back cover ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 8: Troubleshooting Guide
• Check if the cable connecting the damper motor and the touchpad is faulty. If the cable tests as faulty, replace the cable. ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 9: Appendix A - Specifications
10% to 80% Avoid static electricity hazards Avoid electromagnetic radiation sources Avaoid dust contamination Avoid highly corosive environments Maximum Single Cable Length Control Cable (Centre Latched): 20 meters ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions... -
Page 10: Appendix B - Zonemaster Cable Tester
Portable, quick and easy to test cables. • Bright LED’s to indicate a faulty cable in the dark roof spaces. • 9V battery operated. • User Instructions provide ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions... - Page 11 ZONEMASTER ZONE SWITCH (TWO ZONE) DAMPER CONTROL SYSTEM - Operation & Installation Instructions...
- Page 12 POLYAIRE PTY LTD 11-13 WHITE ROAD GEPPS CROSS SOUTH AUSTRALIA, 5094 TEL: (08) 8349 8466 FAX: (08) 8349 8446 www.zonemaster.com.au www.polyaire.com.au...
Need help?
Do you have a question about the Zonemaster Zone Switch and is the answer not in the manual?
Questions and answers