Table of Contents
Advertisement
36
The MI16 MK3 version has an integral switch which allows the selection of the radio
reception sensitivity level.
The switch is located on the rear panel.
The sensitivity can be selected from three levels:
HIGH :
The reception sensitivity is strong.
ð The reception distance is longer.
ð The parasitic sensitivity is increased.
LOW :
The reception sensitivity is lower.
ð The reception distance is smaller.
ð The parasitic sensitivity is diminished.
MEDIUM : This position is a compromise between the two previous.
ADVICE ON SELECTION OF SWITCH POSITION
The choice of the switch position is dependent on the probe power version sold in the
different markets.
The following positions are recommended:
HIGH = USA Market
LOW = CEE Market
MEDIUM = JAPAN Market
Note : The choice of the MI16 interface sensitivity does not replace the procedures for
the antenna installation (see RMM2 ANTENNA-Operating envelope and installation).
ADDENDUM 3
SELECTION OF MI16 SENSITIVITY
Switch : 3 positions
Advertisement
Table of Contents
