Table of Contents
Advertisement
SIDE EXIT CABLE
60mm (2.36in)
40mm
(1.57in)
REAR EXIT CABLE
68mm
(2.677in)
120°
PCD
11,5mm
(0.45in)
120°
Rear view
Disconnect the RMM2 antenna and connect the
second RMM2 cable to either of the MI16
antenna inputs.
Position the second RMM2 such that the regions
of weak signal do not coincide with those
observed with the first RMM2. A good solution is
to mount antennae at 90
dimensions mm (in)
34mm
(1.39in)
16.5mm (0.65in)
270mm (10.63in)
30°
°
to each other.
60mm (2.36in)
40mm
(1.57in)
Once a suitable position has been established,
reconnect the first RMM2 and the system is
ready for use.
68mm
(2.677in)
PCD
120°
30°
Top view
The cable must be protected
from the machine environment
by suitable conduit.
(Thomas and Betts
SHURESEAL 1/4in,
Part No TBEF 0250-50,
or equivalent).
270mm (10.63in)
17
120°
Advertisement
Table of Contents
