1
1
Open the cover
Open the cover
2
2
Remove the dust
Remove the dust
box and empty it
box and empty it
In this process, the suction
inlet is facing upwards to
prevent dust from falling out
3 3
And removing the pleats fi lter; clean the pleats fi lter and the mesh fi lter
And removing the pleats fi lter; clean the pleats fi lter and the mesh fi lter
4
4
Carefully remove rubbish, dust etc.
Carefully remove rubbish, dust etc.
You can wash with water if
You can wash with water if
the dust box is especially dirty
the dust box is especially dirty
Pour them directly under the faucet
(do not brush with a brush, etc.)
Remove dust from the
Remove dust from the
5
5
air intake
air intake
If you cannot remove it, detach the
rotating brush and perform maintenance.
( P. EN18 )
6
6
Reassemble the dust box and
Reassemble the dust box and
put back into the main unit
put back into the main unit
(After the dust box is installed,
(After the dust box is installed,
please close the cover)
please close the cover)
If the dust box is not installed or is not
installed in place, the cover will not be closed.
Press "
"
Tap lightly to shake off the dust
Pleats filter
While opening
Face the suction
inlet upwards
(dry properly before putting back in place)
Dust box (including the mesh filter)
Rinse with water
Close the dust box
Dispose of the dust
Put back the dust box
17
•