Tuning The Television; Automatic Tuning; Fine Tuning - Beko E1 Operating Instructions Manual

Enter the desired program number
by using the numeric buttons
Use the Volume up/down buttons
to select the program number.
Use the Program down button
to select STORE. Press the OK
button and STORED will appear
on the STORE line. The channel
will be stored with the program
number you desired.
You have now stored the first
channel.
Use the Program up button to
select again CHANNEL and
continue the tuning procedure until
you have tuned in all the
programmes you want or the
television can receive.
T o exit the SETUP menu press
the TXT button.
Please note
The system I will displayed automatically
on SYSTEM row.
Please note
If you do not press any buttons for 20
seconds the TV will exit the menu system.
Automatic Tuning (Autoprogram)
Enter the SETUP menu as before.
SETUP
SETUP
CHANNEL C 26
SYSTEM I
FINE TUNE 0
SEARCH
AUTOPROGRAM
CHILD LOCK OFF
PROGRAM NO P6
STORE
0 9
C/S
NEXT MENU
Use the Program down button to
select AUTOPROGRAM and
press the OK button.
Please Note:
a) TV's equipped with ATS a COUNTRY
S E L E C T I O N m e n u w i l l a p p e a r.
Select UK using Program and Volume
buttons.
Press the OK button to select the country
and press the OK button again.
b) TV's without ATS pressing the OK
button twice starts AUTOPROGRAM.
When you are sure the aerial is
connected properly press the OK
button and to confirm it press
OK button again.
T o cancel Autoprogram whilst it is
working press the Menu button.
As Autoprogram stores a channel
it will appear briefly on the screen.
Your TV is now tuned and ready to use.
Please note:
If auto sort fails to arrange the programmes
in the required sequence please refer to
P r o g r a m O r g a n i s i n g . ( P a g e 1 0 )

Fine Tuning

Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
In the SETUP menu use the
Program down button to select
FINE TUNING. Use the Volume
up and Volume down buttons to
fine tune.
When you have finished use the
Program down button to select
STORE and press the OK button.
9