Tuning Analogue Television Channels - Beko B40K 580 Brief Instruction

DETAILED CHANNEL SETTINGS
Tuning analogue television chan-
nels
This setting is only necessary if you have not
carried out an analogue search during the first
time installation.
The television channel can be set directly or
using the search.
Switching the television to analogue
channels
Note:
Analog channels can only be selected
7
while »Air« or »Cable« sources are active.
1 Open the »Input Source« menu with »
2 Select »ATV« using »
firm with »OK«.
Note:
Additional operations are explained in the
7
following sections.
Re-tuning all analogue television
channels
Note:
Plug the rooftop antenna cable (for ana-
7
logue television stations) into the RF IN T2
socket on the television.
1 Press »MENU« to open the menu.
< >
2 Press »
« or »
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
3 Select »Auto Tuning« with »
confirm with »OK«.
– »Tuning Setup« menu will be displayed.
50 / 57 TR
« or » « and con-
V Λ
« to select the »CHANNEL«
« or » « and
V Λ
----------------------------------------------------
Tuning Setup
Country
Tune Type
Scan type
Scan Type
Network ID
Frequency
Symbol Rate
Back
MENU
«.
4 Select »Tune Type« with»
select »ATV« with »
5 Go to »Country« with »
select the country with »
6 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes depend-
ing on the number of television channels
received.
Note:
The search can be aborted with »EXIT«.
7
7 Press »EXIT« to end searching.
Turkey
ATV
DVB-T
Full
Auto
Auto
Auto
Start
ENTER
« or » « and
V Λ
< >
« or » «.
« or » « and
V Λ
< >
« or » «.
Television / User Manual