Table of Contents
Advertisement
DETAILED CHANNEL SETTINGS
Tuning analogue television
channels
This setting is only necessary if you have
not carried out an analogue search during
the first time installation.
The television channel can be set directly
or using the search.
Switching the television to analogue
channels
Note:
Analog channels can only be selected
7
while »Air« or »Cable« sources are
active.
1 Open the »Input Source« menu with »
«.
2 Select »ATV« using »
confirm with »
Note:
Additional operations are explained in
7
the following sections.
Re-tuning all analogue television
channels
Note:
Plug the rooftop antenna cable (for
7
analogue television stations) into the
RF IN T2 socket on the television.
1 Press »
« to open the menu.
p
<
>
2 Press »
« or »
»CHANNEL« menu and press »
confirm.
– »CHANNEL« menu is now enabled.
3 Select »Auto Tuning« with »
and confirm with »
– »Tuning Setup« menu will be
displayed.
« or »
« and
V
Λ
«.
« to select the
« to
« or »
V
«.
Country
Tune Type
Scan type
Scan Type
Network ID
Frequency
Symbol Rate
Back
MENU
4 Select »Tune Type« with»
and select »ATV« with »
5 Go to »Country« with »
select the country with »
6 Press »
– The »Channel Tuning« menu will
be displayed and the search for TV
channels will start.
– Search may take several minutes
depending on the number of
television channels received.
Note:
The search can be aborted with
7
»EXIT«.
7 Press »EXIT« to end searching.
«
Λ
EN / 44
- - --------------------------------------------
Tuning Setup
Turkey
ATV
DVB-T
Full
Auto
Auto
Auto
Start
ENTER
« or »
V
<
« or »
« or »
V
<
« or »
« to start the search.
«
Λ
>
«.
« and
Λ
>
«.
Advertisement
Table of Contents
